1. Product adaptation
- Compatible Coffee Weigher: BOOKOO SCALE-mini, Acaia lunar, Felicita ARC
- Compatible devices (direct plug): Flair58, coffee devices with G1/8 threads
- Compatible devices (requires m6 adapter kit): Lelit v3, Rocket R58, Profitec Pro 400, 500, 600, 700 ECM Puristika, Mechanika, Synchronika and other devices with E61 brewing head
- Others: devices with pressure gauges can be used in principle, but it is recommended to operate the modification under the guidance of professionals, the BOOKOO team is not responsible for the modification behavior
(The list of compatible coffee machine devices is constantly being updated)
2. Bluetooth not connecting
Download BOOKOO Tools APP to upgrade to the latest firmware version, after upgrading, we suggest you turn off the automatic connection in BOOKOO App setting page, and then reconnect EM with BOOKOO APP manually.
3. Data reading errors, non-synchronous
Whether the firmware is the latest version, usually restart the APP first and then reconnect the EM manually, if the problem still exists then please contact us.
4. Installation issues
Normally, our EM is mounted on the short side of the tee that has the BK symbol.
5. Tee orientation issues
Because the thread is not the same problem, so if you tighten it, the orientation may not be the same, so in order to solve this problem, we designed the O-ring and seal to achieve the O-ring and seal to achieve the O-ring and seal to achieve the O-ring does not need to be screwed particularly tightly, after tightening to regulate the position of the table, such as screwing a little bit looser to come over the table after the table to the right on the line, so that the leakage will not occur.
6. Problems with importing visualization files
Our APP currently does not support importing curve information from visualizer, we will take this requirement into consideration later, thank you for your feedback.
7. When in use, there is water leakage at the connection with the coffee machine
Please remove the tee and check if the large washer at the threads has come off. If it is the red O-ring that has come off, there is a replacement O-ring in the supplied kit. If none of the above, please contact us.